| Crankcase capacity, l | 0,5 |
|---|---|
| Dimensions | 117х45х80 cm |
| The diameter of the threaded connection for the filter | 1/2" |
| Cylinder diameter | 65 mm |
| Protection against overheating | yes |
| Protection against pumping | yes |
| Protection class | IP 20 |
| Revolutions per minute | 2850 rpm/min |
| Number of pistons | 2 |
| Max. the length of the extension cord, 3 cores with a cross section of 1.5 mm2 | 7,5 m |
| Max. the length of the extension cord, 3 cores with a cross section of 2.5 mm2 | 12,5 m |
| Mains voltage | 230 V |
| The volume of the cylinder | 2*154 (308) cm3 |
| Receiver volume | 100 l |
| Power | 2200 W |
| Output performance | 290 l/min |
| Productivity at the entrance | 400 l/min |
| Working pressure | 8 Bar |
| Sound pressure level, dB | 93 |
| Sound power level, dB | 99 |
| Compatible with drive belt | ACB-1295, ACB-1118 |
| Compatibility with the filter | AFC-105VG |
| Compressor type | oil |
| Type of lubricant | DAA 68 |
| Drive type | belt drive |
| Pumping time, 0-8 Bar | 156 sec |
| Mains frequency | 50 Hz |
| Weight | 64 kg |
The compressor with a 2200 W electric motor is an excellent choice for use in auto repair shops, workshops, and for working with pneumatic equipment and tools.
The compressor’s output of 400 l/min easily allows the use of various types of pneumatic tools. Thanks to the chrome-plated cylinder walls, the compressor's motor life reaches 1000 operating hours.
Long-lasting work, reduced motor load, and additional cooling—all thanks to the belt drive system. The tank volume is 100 liters, the largest in the range, allowing for long and complex tasks. Thanks to a special coating, the tank walls are protected against corrosion for 8 years.
4 measurement gauges and an output pressure regulator help fine-tune the output pressure settings and work with different types of pneumatic tools.
The work will be done faster since the compressor has two output connectors.
The compressor works reliably due to the installed protection system against overload, overheating, over-pumping, and voltage fluctuations in the network. An additional capacitor allows starting the compressor with a network voltage of 210 V.
The increased stiffening ribs, chrome-plated cylinder walls, and metal filters with a larger diameter directly influence the compressor's motor life, greatly increasing the continuous working time, making it suitable for industrial tasks.
The compressor starts even at a temperature of 5°C thanks to the manometric switch with a pressure relief valve.
Designed to easily overcome high obstacles (steps, thresholds) and for comfortable movement on uneven surfaces. They also have increased stiffening ribs, making them more resistant to mechanical damage.
The 4-meter-long power cable allows the compressor to be used without an extension cord (within the length of the cord itself).
This device has two quick-release ports, which are more convenient when working with two pneumatic tools. The device includes a special threaded connection with a cap for connecting an additional tank. This increases the air volume without occupying one of the quick-release ports, and an additional compressor unit can be connected to speed up the process of filling the tank.
We care about your privacy
A dnipro-m.sk uses cookies for marketing and statistical purposes and for a secure and optimal site experience. You can change this in your browser settings. Click on the «Accept cookies» button to consent using cookies. You can read more on the User agreement page.
